DIY Crate Divider: Create a Perfect Size Space for Your Puppy

When shopping for a crate for your puppy, the Humane Society of the United States recommends that it be large enough for an adult dog to stand up and turn around in. This eliminates the cost of buying new, larger crates as your little one grows, but it also means that initially the crate will be too big for your pup. Making a crate divider doesn't require you to buy expensive tools and materials. You might have all of the items you need around your house to create a divider to reduce the size of the crate temporarily and make it just right.

Making the dog crate divider

The items needed to make a crate divider are so basic, you might have all of them on hand at home. They include sturdy materials such as plywood a tape measure, pencil, pen or marker, scissors, or a box cutter and four pieces of wire, each 5 to 6 inches long. Be careful of using items your dog might chew or choke on. Take a look at the assembled crate to see where you might be able to add your divider, based on where it folds and its fasteners are.

Measure the interior of the crate with the tape measure, then cut a piece of cardboard to the same size. Punch holes in each corner of the cardboard piece using the pencil or the scissors, then thread a piece of wire through each hole. Put the divider inside the crate, placing it to make the crate smaller, but still allowing enough room for your puppy to turn around. Secure the divider in place by twisting the pieces of wire around the bars of the crate. Be cautious when working with the wire; the ends can be sharp and can scratch or gouge if you're not careful. Make sure there are no sharp ends sticking out to injure your puppy.

If your pup is a chewer, he might shred a cardboard divider. Pooches who gnaw are better off with a divider made of plywood. Make it just as you would a cardboard divider, but use a handsaw to cut it to the proper size. You can punch holes in the corners by pounding nails through the plywood, or by using a drill. Supervise your puppy in the crate to be sure he doesn't chew the material.